Hemp lime insulation panels – Victorian style!

Documents the discovery of traditional straw, lime and daub infill panels during a survey of a timber framed building.

Just did a survey this week of a very ordinary looking building.  It turned out to be timber framed, on a brick plinth.  But it was really warm and dry inside.  I couldn’t work out why the walls were so solid, and thermal imaging was showing very little heat loss.  

Then I went into the roof space and found the timber frame, infilled with the most magnificent chopped straw / lime / daub mix. I’ve never seen anything like this before – internally it was still lime plastered. Externally it’s cement render – so we aren’t sure whether it will have deteriorated at lower levels, but everything seems to be bone dry.  

What a find!

So when someone tells you that hemp lime is a good ‘green insulation’ material, you can tell them the Victorians did it..!